Find Products:

 Home » PSX Technology Site
PPG Protective and Marine Coatings - Product highlight: PSX 1001
PSX Home  |   PSX 700  |   PSX 1001  |  
Performance Test Results for PSX® 1001: Single pack acrylic polysiloxane

Typical Single Pack system:
Salt Fog Resistance

SA2 blasted steel
Amercoat 1000 / PSX® 1001

1000 hours @ 40µm DFT over Amercoat 1000 @ 125µm DFT
Blistering 8 few
 
Corrosion None  
Scribe performance 7
 
Knife adhesion Good  
Elongation 40µm DFT 13.8%
Direct Impact 75µm DFT 10 inches / lb.
Reverse Impact 75µm DFT < 10 inches / lb.

Epoxy system
Cleveland Humidity Resistance

1000 hours @ 40 µm Topcoat DFT over Epoxy Mastic* @ 175 µm
Topcoat Blistering Corrosion Knife adhesion
(after exposure)
PSX®1001 None None Good
Polyurethane finish None None Good

Epoxy system
Salt Fog Resistance

1000 hours @ 40 µm Topcoat DFT over Epoxy Mastic* @ 175 µm
Topcoat Blistering Corrosion Scrible Knife adhesion
Performance  
(after exposures)
PSX®1001 None None 9 Good
Polyurethane finish None None 8 Good

*PSX®1001 may be used directly over a range of primers and tightly adhering, existing coating systems.
  For unknown prime coats, a test patch may be needed to check adhesion.
  For certain epoxy coatings, sweep blasting or use of Amercoat 71TC may be required.

 

  About PPG PMC  
   
  MSDS Search  
  Case Histories  
   
  Locations  
  Current Events  
  Alliances  
  Government Marine  
     
     
  Contact Us
Site Map
Home
 
     
 

PPG World Headquarters
One PPG Place
Pittsburgh, Pennsylvania
15272 USA
(412) 434-3131

PPG Industries | Headquarters • One PPG Place Pittsburgh, Pennsylvania 15272 USA | © 2001-2012 PPG Industires • All Rights Reserved |Legal Notices and Policies